Yamaha WR250R and WR250X Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: wr250r tank bolts


Member

Status: Offline
Posts: 41
Date:
wr250r tank bolts
Permalink  
 


Hi all I want to change my spark plug can anyone tell me what the tourqe settings are for putting them back in as I'm struggling to find correct settings and don't want my tank falling off cheers martin



__________________
M goodyear


Member

Status: Offline
Posts: 41
Date:
Permalink  
 

I meant petrol tank bolts not spark plug thanks martin

__________________
M goodyear


Veteran Member

Status: Offline
Posts: 282
Date:
Permalink  
 

The fuel tank doesn't require much Martin. My manual states..... Fuel tank bolts M6 x 4 are 7 Nm and Fuel tank bracket bolts M6 x 3 are 10 Nm

Hope that helps buddy,

Paul.

__________________
The WRR movement. Travel often... far and wide.


Veteran Member

Status: Offline
Posts: 213
Date:
Permalink  
 

Grassroots wrote:

The fuel tank doesn't require much Martin. My manual states..... Fuel tank bolts M6 x 4 are 7 Nm and Fuel tank bracket bolts M6 x 3 are 10 Nm

Hope that helps buddy,

Paul.


 So until they feel about right then!

I only bother with torque settings on important engine internals etc.  Otherwise, it's down to experience and feel.



__________________


Veteran Member

Status: Offline
Posts: 282
Date:
Permalink  
 

...absolutely Steve. The amount of things i screwed up in the early days due to being too obsessive with the torque wrench it's untrue biggrin. You're much better off just feeling it by hand .



__________________
The WRR movement. Travel often... far and wide.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard